Optic Adapter supplier for FTTH,GPON Network Solutions with low insert loss

Product Name: Model: ---SM ---MM Fiber Numbers: ---Single Core ---Double Core ---Four Core ---Eight Core Polish: ---PC ---UPC ---APC Appearance: ---Square ---Circular ---Rhombus ---Rectangular ---Auriculate ---Anotia ---Other Sleeve Material: ---Ceramic Color: ---Blue ---Green ---Beige ---Curtom Connector: --LC ---SC ---FC ---ST ---MU ---MPO ---MTRJ ---E2000 ---D4 ---DIN product type Depending on the different optical fiber connectors, the optical fiber adapter can provide a corresponding optical fiber connector. Applicable optical fiber connector models include FC, SC, ST, LC, MTRJ, E2000, etc. Applicable optical fiber connectors include PC, UPC, APC, etc. Optical fiber adapter SC represents Standard Connector. ST represents Straight Tip. FC represents Fiber Connector. "/" Previous parts indicate the applicable optical fiber connector model. The "SC" connector is a standard square connector. It uses engineering plastics. It has high temperature resistance and is not easy to oxidize the advantages. The side light interface of the transmission device is generally used in the SC connection. The "LC" connector is similar to the SC connector, smaller than the SC connector. The "FC" connector is a metal connector, which is generally used on the ODF side. The number of plugging times of metal connectors is more than plastic. There are many types of connectors. In addition to the three types introduced above, there are MTRJ, ST, MU, etc. For the specific appearance, see the figure below. /"Later indicates that the cross section of the fiber connector, that is, the grinding method. "PC" has the most widely used equipment in telecommunications operators, and its connector section is flat. The decay of "UPC" is smaller than "PC". It is generally used for equipment with special needs. Some foreign manufacturers ODF stand in the interior of FC/UPC, which is mainly to improve the index of ODF device itself. "APC" indicates that the oblique 8 -degree angle is polished. In the radio and television and early CATV, the "APC" model is more. The tail fibrous head uses the end surface of the tilt angle, which can improve the quality of the TV signal. The main reason is that the TV signal is the TV signal. It is the simulation light modulation. When the connector coupling surface is vertical, the reflected light returns along the original path. Because the uneven distribution of the fiber fiber will return the coupling surface again, at this time, although the energy is very small, because the simulation signal cannot completely eliminate the noise, it is equivalent to a weak signal with delay on the original clear signal. It is shown in the picture. The tail fibrous headband lean angle can return the reflex light to the original path. This problem generally does not exist in digital signals.